The Image hotspots section shows a large image or video with pins placed on top of it. Customers click a pin to read a short note about that spot, for example the product in the picture and what it does.
The section has its own settings for the media, the hotspot display and the layout, and one Hotspot block for each pin.

Click Image hotspots in the left sidebar to see the section settings on the right-hand sidebar.

The settings at the top of the panel choose the media behind the pins and control its height.

Media type: Choose Image or Video as the background of the section. The default is Image.
Media height: Choose how tall the media is on screens 768px wide and larger:
Adapt to media: Keep the original ratio of the image or video (default).
Fixed: Set an exact height with Fixed height, from 300 to 1200 px (760 px by default).
Fill screen height: Make the media as tall as the screen.
Mobile media height: Choose the same options for screens narrower than 768px. With Fixed, set Mobile fixed height from 200 to 900 px (500 px by default).
Image: Select the image shown in the section. Appears when Media type is set to Image.
Mobile image: Select a different image for mobile, for example a portrait crop. Appears after you select an Image. If none is set, the desktop image will be used.
When Media type is set to Video, the image fields are replaced by:

Video: Select the video shown in the section.
Cover image: Select the image shown as the cover of the video. A 3200 x 1600px .jpg is recommended; the image can cut a little bit off one of the edges.
These two settings control how the pins look when the page loads.

Auto open first hotspot: Turn on to show the content of the first hotspot as soon as the page loads, so customers can see that the pins open. It is off by default.
Overlay color: Choose a color laid over the whole image or video. The default is black at low opacity, which darkens the media slightly so the pins stand out. Lower the opacity to keep the media brighter.

Color scheme: Select the color scheme applied to the section. You can choose an available color scheme or customize it through Edit scheme.
Width:
Page: Keep the section within the page width.
Full: Stretch the section across the full screen width.
Use these settings to adjust the space above and below the section on screens 768px wide and larger.
Top: Set the space above the section, from 0 to 200 px (60 px by default).
Bottom: Set the space below the section, from 0 to 200 px (60 px by default).
Use these settings to adjust the space above and below the section on screens narrower than 768px.
Top: Set the space above the section, from 0 to 200 px (40 px by default).
Bottom: Set the space below the section, from 0 to 200 px (40 px by default).
Each Hotspot block is one pin on the media. Click Add Hotspot under Image hotspots in the left sidebar to add a pin, then click the Hotspot block to edit it. When you select a block, the editor opens its pin on the preview so you can see the content.

Content: Enter the text shown when customers open the pin. A hotspot with empty content is not shown.
Maximum width content: Set the maximum width of the content box, from 100 to 1000 px (360 px by default).
Position horizon: Set the horizontal position of the pin, from 0% (left edge of the media) to 100% (right edge).
Position vertical: Set the vertical position of the pin, from 0% (top edge of the media) to 100% (bottom edge).
Placement: Choose whether the content opens to the Left or Right of the pin. If there is not enough room on that side, the content opens on the other side.
On screens 768px wide and larger: Customers click a pin to open its content next to the pin. Only one hotspot is open at a time. Clicking the open pin, clicking its content box or pressing Esc closes it.
On screens narrower than 768px: The content of the selected pin is shown as a caption below the media instead of next to the pin. Customers tap another pin to change the caption.